Colour to colour
Copper to Cadet Blue gradient
Copper (#b87333) into Cadet Blue (#5f9ea0) — 138° apart on the OKLCH hue wheel. Below: the same two stops interpolated in OKLab and in OKLCH, side by side, because the difference is real and most generators never let you see it; then an eased version and a mesh, each with the worst-case contrast for white and black text. The engine's own pick for this pair is oklab — both colours are in the palette and the hue gap is small enough that the straight line stays clean.
OKLab and OKLCH, side by side
OKLab
Open in maker →A straight line through the a/b plane: the two hues meet halfway and desaturate a little at the midpoint. The safe default — it is what CSS and Tailwind default to.
linear-gradient(135deg in oklab, #b87333 0%, #5f9ea0 100%)
OKLCH (shorter hue)
Open in maker →Chroma and hue interpolate separately, so the midpoint keeps its saturation and the hue travels the short way round the wheel — richer, and it can pass through hues neither colour has.
linear-gradient(135deg in oklch shorter hue, #b87333 0%, #5f9ea0 100%)
And the sRGB line most tools draw, for comparison — the number is the chroma that survives at the dullest point.
Eased and mesh
Eased (soft)
Open in maker →A cubic-bezier(.4, 0, .6, 1) mix ratio baked into 15 stops: the transition lingers on each colour and moves faster through the middle, which is what makes a gradient read as designed rather than default.
linear-gradient(135deg in oklab, #b87333 0%, #b77435 8.28%, #b4763c 16.03%, #b07944 23.35%, #ab7d4e 30.32%, #a48259 37.03%, #9c8765 43.56%, #948b70 50%, #8b907a 56.44%, #819484 62.97%, #77978d 69.68%, #6e9a95 76.65%, #679c9b 83.97%, #619e9f 91.72%, #5f9ea0 100%)
Mesh
Open in maker →Both colours as stacked radials over a base, laid out by a seeded Poisson-disc sampler — the same seed gives the same mesh forever. Exports as CSS, SVG and PNG.
background-color: #948b70; background-image: radial-gradient(circle farthest-corner at 24.99% 18.27%, rgba(184, 115, 51, 0.794) 0%, rgba(184, 115, 51, 0) 49.36%), radial-gradient(circle farthest-corner at 51.32% 65.92%, rgba(95, 158, 160, 0.733) 0%, rgba(95, 158, 160, 0) 50.9%); background-image: radial-gradient(circle farthest-corner at 24.99% 18.27%, oklch(from #b87333 l c h / 0.7939) 0%, rgb(from #b87333 r g b / 0) 49.36%), radial-gradient(circle farthest-corner at 51.32% 65.92%, oklch(from #5f9ea0 l c h / 0.7326) 0%, rgb(from #5f9ea0 r g b / 0) 50.9%);
Report
- white ink: worst 3.04:1 at 100% (AA-large only); black ink: worst 5.51:1 at 1% (AA) → use black text.
- Banding high: ~13px bands at 1440px — add grain 28 (≈2% soft-light noise) or shorten the ramp.
Export
.gradient {
background-image: linear-gradient(135deg, #b87333 0%, #b3773e 7.14%, #af7b48 14.29%, #aa7e50 21.43%, #a58259 28.57%, #9f8561 35.71%, #9a8868 42.86%, #948b70 50%, #8e8e77 57.14%, #87917e 64.29%, #819485 71.43%, #79978c 78.57%, #719993 85.71%, #699c99 92.86%, #5f9ea0 100%);
background-image: linear-gradient(135deg in oklab, #b87333 0%, #5f9ea0 100%);
}bg-linear-to-br/oklab from-[#b87333] to-[#5f9ea0]
<svg xmlns="http://www.w3.org/2000/svg" width="1440" height="600" viewBox="0 0 1440 600"><defs><linearGradient id="bs-gradient" gradientUnits="userSpaceOnUse" x1="210" y1="-210" x2="1230" y2="810"><stop offset="0%" stop-color="#b87333"/><stop offset="7.14%" stop-color="#b3773e"/><stop offset="14.29%" stop-color="#af7b48"/><stop offset="21.43%" stop-color="#aa7e50"/><stop offset="28.57%" stop-color="#a58259"/><stop offset="35.71%" stop-color="#9f8561"/><stop offset="42.86%" stop-color="#9a8868"/><stop offset="50%" stop-color="#948b70"/><stop offset="57.14%" stop-color="#8e8e77"/><stop offset="64.29%" stop-color="#87917e"/><stop offset="71.43%" stop-color="#819485"/><stop offset="78.57%" stop-color="#79978c"/><stop offset="85.71%" stop-color="#719993"/><stop offset="92.86%" stop-color="#699c99"/><stop offset="100%" stop-color="#5f9ea0"/></linearGradient></defs><rect width="1440" height="600" fill="url(#bs-gradient)"/></svg>
{
"copper-to-cadetblue": {
"$type": "gradient",
"$value": [
{
"color": {
"colorSpace": "srgb",
"components": [
0.722,
0.451,
0.2
],
"hex": "#b87333"
},
"position": 0
},
{
"color": {
"colorSpace": "srgb",
"components": [
0.373,
0.62,
0.627
],
"hex": "#5f9ea0"
},
"position": 1
}
],
"$extensions": {
"com.brandsweets": {
"kind": "linear",
"css": "linear-gradient(135deg in oklab, #b87333 0%, #5f9ea0 100%)",
"interpolation": "oklab",
"angle": 135,
"name": "copper-to-cadetblue",
"contrast": {
"white": {
"ratio": 3.045,
"at": 0.9965,
"passesAA": false,
"passesAALarge": true
},
"black": {
"ratio": 5.515,
"at": 0.0089,
"passesAA": true,
"passesAALarge": true
},
"suggestedInk": "#000000"
}
}
},
"$description": "Copper to Cadet Blue, interpolated in oklab."
}
}More from Copper
Point any MCP client at the shared gradients endpoint and your agent gets the same engine as this page — make_gradient returns CSS with the interpolation space, Tailwind v4, SVG, a PNG URL, a DTCG token and the contrast report in one call; brand_gradients derives the whole contact sheet from a brand or a palette. Read-only, no key. Every gradient is a /gradients/new/… link: open it, refine, paste it back.
https://mcp.brandsweets.com/gradients/mcpclaude mcp add --transport http brandsweets-gradients https://mcp.brandsweets.com/gradients/mcp
›make a copper to cadet blue hero gradient in oklch that passes AA for white text, with grain if it bands
Want the agent to remember your picks and write them into a living brand? Create a free BrandSweets workspace.
Machine-readable: gradients.md