Colour to colour
Lilac to Copper gradient
Lilac (#c8a2c8) into Copper (#b87333) — 94° apart on the OKLCH hue wheel. Below: the same two stops interpolated in OKLab and in OKLCH, side by side, because the difference is real and most generators never let you see it; then an eased version and a mesh, each with the worst-case contrast for white and black text. The engine's own pick for this pair is oklab — both colours are in the palette and the hue gap is small enough that the straight line stays clean.
OKLab and OKLCH, side by side
OKLab
Open in maker →A straight line through the a/b plane: the two hues meet halfway and desaturate a little at the midpoint. The safe default — it is what CSS and Tailwind default to.
linear-gradient(135deg in oklab, #c8a2c8 0%, #b87333 100%)
OKLCH (shorter hue)
Open in maker →Chroma and hue interpolate separately, so the midpoint keeps its saturation and the hue travels the short way round the wheel — richer, and it can pass through hues neither colour has.
linear-gradient(135deg in oklch shorter hue, #c8a2c8 0%, #b87333 100%)
And the sRGB line most tools draw, for comparison — the number is the chroma that survives at the dullest point.
Eased and mesh
Eased (soft)
Open in maker →A cubic-bezier(.4, 0, .6, 1) mix ratio baked into 15 stops: the transition lingers on each colour and moves faster through the middle, which is what makes a gradient read as designed rather than default.
linear-gradient(135deg in oklab, #c8a2c8 0%, #c8a1c6 8.28%, #c7a0c0 16.03%, #c69db8 23.35%, #c59aad 30.32%, #c395a0 37.03%, #c29192 43.56%, #c08c83 50%, #be8774 56.44%, #bd8265 62.97%, #bb7d57 69.68%, #ba794a 76.65%, #b9763e 83.97%, #b87436 91.72%, #b87333 100%)
Mesh
Open in maker →Both colours as stacked radials over a base, laid out by a seeded Poisson-disc sampler — the same seed gives the same mesh forever. Exports as CSS, SVG and PNG.
background-color: #c08c83; background-image: radial-gradient(circle farthest-corner at 86.37% 36.95%, rgba(184, 115, 51, 0.731) 0%, rgba(184, 115, 51, 0) 52.54%), radial-gradient(circle farthest-corner at 35.3% 35.51%, rgba(200, 162, 200, 0.867) 0%, rgba(200, 162, 200, 0) 53.01%); background-image: radial-gradient(circle farthest-corner at 86.37% 36.95%, oklch(from #b87333 l c h / 0.7313) 0%, rgb(from #b87333 r g b / 0) 52.54%), radial-gradient(circle farthest-corner at 35.3% 35.51%, oklch(from #c8a2c8 l c h / 0.8673) 0%, rgb(from #c8a2c8 r g b / 0) 53.01%);
Report
- white ink: worst 2.22:1 at 0% (fails AA); black ink: worst 5.54:1 at 100% (AA) → use black text.
- Banding high: ~10px bands at 1440px — add grain 20 (≈2% soft-light noise) or shorten the ramp.
Export
.gradient {
background-image: linear-gradient(135deg, #c8a2c8 0%, #c79fbe 7.14%, #c69cb5 14.29%, #c599ab 21.43%, #c496a1 28.57%, #c29297 35.71%, #c18f8d 42.86%, #c08c83 50%, #bf8979 57.14%, #be856f 64.29%, #bd8264 71.43%, #bc7e59 78.57%, #ba7a4e 85.71%, #b97741 92.86%, #b87333 100%);
background-image: linear-gradient(135deg in oklab, #c8a2c8 0%, #b87333 100%);
}bg-linear-to-br/oklab from-[#c8a2c8] to-[#b87333]
<svg xmlns="http://www.w3.org/2000/svg" width="1440" height="600" viewBox="0 0 1440 600"><defs><linearGradient id="bs-gradient" gradientUnits="userSpaceOnUse" x1="210" y1="-210" x2="1230" y2="810"><stop offset="0%" stop-color="#c8a2c8"/><stop offset="7.14%" stop-color="#c79fbe"/><stop offset="14.29%" stop-color="#c69cb5"/><stop offset="21.43%" stop-color="#c599ab"/><stop offset="28.57%" stop-color="#c496a1"/><stop offset="35.71%" stop-color="#c29297"/><stop offset="42.86%" stop-color="#c18f8d"/><stop offset="50%" stop-color="#c08c83"/><stop offset="57.14%" stop-color="#bf8979"/><stop offset="64.29%" stop-color="#be856f"/><stop offset="71.43%" stop-color="#bd8264"/><stop offset="78.57%" stop-color="#bc7e59"/><stop offset="85.71%" stop-color="#ba7a4e"/><stop offset="92.86%" stop-color="#b97741"/><stop offset="100%" stop-color="#b87333"/></linearGradient></defs><rect width="1440" height="600" fill="url(#bs-gradient)"/></svg>
{
"lilac-to-copper": {
"$type": "gradient",
"$value": [
{
"color": {
"colorSpace": "srgb",
"components": [
0.784,
0.635,
0.784
],
"hex": "#c8a2c8"
},
"position": 0
},
{
"color": {
"colorSpace": "srgb",
"components": [
0.722,
0.451,
0.2
],
"hex": "#b87333"
},
"position": 1
}
],
"$extensions": {
"com.brandsweets": {
"kind": "linear",
"css": "linear-gradient(135deg in oklab, #c8a2c8 0%, #b87333 100%)",
"interpolation": "oklab",
"angle": 135,
"name": "lilac-to-copper",
"contrast": {
"white": {
"ratio": 2.22,
"at": 0,
"passesAA": false,
"passesAALarge": false
},
"black": {
"ratio": 5.538,
"at": 1,
"passesAA": true,
"passesAALarge": true
},
"suggestedInk": "#000000"
}
}
},
"$description": "Lilac to Copper, interpolated in oklab."
}
}More from Lilac
Point any MCP client at the shared gradients endpoint and your agent gets the same engine as this page — make_gradient returns CSS with the interpolation space, Tailwind v4, SVG, a PNG URL, a DTCG token and the contrast report in one call; brand_gradients derives the whole contact sheet from a brand or a palette. Read-only, no key. Every gradient is a /gradients/new/… link: open it, refine, paste it back.
https://mcp.brandsweets.com/gradients/mcpclaude mcp add --transport http brandsweets-gradients https://mcp.brandsweets.com/gradients/mcp
›make a lilac to copper hero gradient in oklch that passes AA for white text, with grain if it bands
Want the agent to remember your picks and write them into a living brand? Create a free BrandSweets workspace.
Machine-readable: gradients.md