Colour to colour
Sage Green to Copper gradient
Sage Green (#9caf88) into Copper (#b87333) — 69° apart on the OKLCH hue wheel. Below: the same two stops interpolated in OKLab and in OKLCH, side by side, because the difference is real and most generators never let you see it; then an eased version and a mesh, each with the worst-case contrast for white and black text. The engine's own pick for this pair is oklab — both colours are in the palette and the hue gap is small enough that the straight line stays clean.
OKLab and OKLCH, side by side
OKLab
Open in maker →A straight line through the a/b plane: the two hues meet halfway and desaturate a little at the midpoint. The safe default — it is what CSS and Tailwind default to.
linear-gradient(135deg in oklab, #9caf88 0%, #b87333 100%)
OKLCH (shorter hue)
Open in maker →Chroma and hue interpolate separately, so the midpoint keeps its saturation and the hue travels the short way round the wheel — richer, and it can pass through hues neither colour has.
linear-gradient(135deg in oklch shorter hue, #9caf88 0%, #b87333 100%)
And the sRGB line most tools draw, for comparison — the number is the chroma that survives at the dullest point.
Eased and mesh
Eased (soft)
Open in maker →A cubic-bezier(.4, 0, .6, 1) mix ratio baked into 15 stops: the transition lingers on each colour and moves faster through the middle, which is what makes a gradient read as designed rather than default.
linear-gradient(135deg in oklab, #9caf88 0%, #9dae87 8.28%, #9eac84 16.03%, #a1a87f 23.35%, #a4a479 30.32%, #a79e71 37.03%, #aa9869 43.56%, #ad9260 50%, #b08c58 56.44%, #b2854f 62.97%, #b48046 69.68%, #b67b3f 76.65%, #b77739 83.97%, #b87435 91.72%, #b87333 100%)
Mesh
Open in maker →Both colours as stacked radials over a base, laid out by a seeded Poisson-disc sampler — the same seed gives the same mesh forever. Exports as CSS, SVG and PNG.
background-color: #ad9260; background-image: radial-gradient(circle farthest-corner at 16.32% 81.22%, rgba(184, 115, 51, 0.743) 0%, rgba(184, 115, 51, 0) 52.35%), radial-gradient(circle farthest-corner at 57.85% 86.37%, rgba(156, 175, 136, 0.853) 0%, rgba(156, 175, 136, 0) 49.29%); background-image: radial-gradient(circle farthest-corner at 16.32% 81.22%, oklch(from #b87333 l c h / 0.7425) 0%, rgb(from #b87333 r g b / 0) 52.35%), radial-gradient(circle farthest-corner at 57.85% 86.37%, oklch(from #9caf88 l c h / 0.8526) 0%, rgb(from #9caf88 r g b / 0) 49.29%);
Report
- white ink: worst 2.36:1 at 0% (fails AA); black ink: worst 5.54:1 at 100% (AA) → use black text.
- Banding high: ~17px bands at 1440px — add grain 35 (≈2% soft-light noise) or shorten the ramp.
Export
.gradient {
background-image: linear-gradient(135deg, #9caf88 0%, #9fab82 7.14%, #a2a77d 14.29%, #a4a377 21.43%, #a79f72 28.57%, #a99a6c 35.71%, #ab9666 42.86%, #ad9260 50%, #af8e5a 57.14%, #b18954 64.29%, #b3854e 71.43%, #b48148 78.57%, #b67c41 85.71%, #b7783a 92.86%, #b87333 100%);
background-image: linear-gradient(135deg in oklab, #9caf88 0%, #b87333 100%);
}bg-linear-to-br/oklab from-[#9caf88] to-[#b87333]
<svg xmlns="http://www.w3.org/2000/svg" width="1440" height="600" viewBox="0 0 1440 600"><defs><linearGradient id="bs-gradient" gradientUnits="userSpaceOnUse" x1="210" y1="-210" x2="1230" y2="810"><stop offset="0%" stop-color="#9caf88"/><stop offset="7.14%" stop-color="#9fab82"/><stop offset="14.29%" stop-color="#a2a77d"/><stop offset="21.43%" stop-color="#a4a377"/><stop offset="28.57%" stop-color="#a79f72"/><stop offset="35.71%" stop-color="#a99a6c"/><stop offset="42.86%" stop-color="#ab9666"/><stop offset="50%" stop-color="#ad9260"/><stop offset="57.14%" stop-color="#af8e5a"/><stop offset="64.29%" stop-color="#b18954"/><stop offset="71.43%" stop-color="#b3854e"/><stop offset="78.57%" stop-color="#b48148"/><stop offset="85.71%" stop-color="#b67c41"/><stop offset="92.86%" stop-color="#b7783a"/><stop offset="100%" stop-color="#b87333"/></linearGradient></defs><rect width="1440" height="600" fill="url(#bs-gradient)"/></svg>
{
"sage-green-to-copper": {
"$type": "gradient",
"$value": [
{
"color": {
"colorSpace": "srgb",
"components": [
0.612,
0.686,
0.533
],
"hex": "#9caf88"
},
"position": 0
},
{
"color": {
"colorSpace": "srgb",
"components": [
0.722,
0.451,
0.2
],
"hex": "#b87333"
},
"position": 1
}
],
"$extensions": {
"com.brandsweets": {
"kind": "linear",
"css": "linear-gradient(135deg in oklab, #9caf88 0%, #b87333 100%)",
"interpolation": "oklab",
"angle": 135,
"name": "sage-green-to-copper",
"contrast": {
"white": {
"ratio": 2.359,
"at": 0,
"passesAA": false,
"passesAALarge": false
},
"black": {
"ratio": 5.538,
"at": 1,
"passesAA": true,
"passesAALarge": true
},
"suggestedInk": "#000000"
}
}
},
"$description": "Sage Green to Copper, interpolated in oklab."
}
}More from Sage Green
Point any MCP client at the shared gradients endpoint and your agent gets the same engine as this page — make_gradient returns CSS with the interpolation space, Tailwind v4, SVG, a PNG URL, a DTCG token and the contrast report in one call; brand_gradients derives the whole contact sheet from a brand or a palette. Read-only, no key. Every gradient is a /gradients/new/… link: open it, refine, paste it back.
https://mcp.brandsweets.com/gradients/mcpclaude mcp add --transport http brandsweets-gradients https://mcp.brandsweets.com/gradients/mcp
›make a sage green to copper hero gradient in oklch that passes AA for white text, with grain if it bands
Want the agent to remember your picks and write them into a living brand? Create a free BrandSweets workspace.
Machine-readable: gradients.md