Colour to colour · generated
Burlywood to Ochre gradient
Burlywood (#deb887) into Ochre (#cc7722) — 14° apart on the OKLCH hue wheel. Below: the same two stops interpolated in OKLab and in OKLCH, side by side, because the difference is real and most generators never let you see it; then an eased version and a mesh, each with the worst-case contrast for white and black text. The engine's own pick for this pair is oklab — both colours are in the palette and the hue gap is small enough that the straight line stays clean.
OKLab and OKLCH, side by side
OKLab
Open in maker →A straight line through the a/b plane: the two hues meet halfway and desaturate a little at the midpoint. The safe default — it is what CSS and Tailwind default to.
linear-gradient(135deg in oklab, #deb887 0%, #cc7722 100%)
OKLCH (shorter hue)
Open in maker →Chroma and hue interpolate separately, so the midpoint keeps its saturation and the hue travels the short way round the wheel — richer, and it can pass through hues neither colour has.
linear-gradient(135deg in oklch shorter hue, #deb887 0%, #cc7722 100%)
And the sRGB line most tools draw, for comparison — the number is the chroma that survives at the dullest point.
Eased and mesh
Eased (soft)
Open in maker →A cubic-bezier(.4, 0, .6, 1) mix ratio baked into 15 stops: the transition lingers on each colour and moves faster through the middle, which is what makes a gradient read as designed rather than default.
linear-gradient(135deg in oklab, #deb887 0%, #deb786 8.28%, #ddb482 16.03%, #dcb07d 23.35%, #dbab76 30.32%, #daa56d 37.03%, #d89f64 43.56%, #d6985a 50%, #d49150 56.44%, #d28a46 62.97%, #d0843c 69.68%, #cf7f32 76.65%, #cd7b2a 83.97%, #cc7824 91.72%, #cc7722 100%)
Mesh
Open in maker →Both colours as stacked radials over a base, laid out by a seeded Poisson-disc sampler — the same seed gives the same mesh forever. Exports as CSS, SVG and PNG.
background-color: #d6985a; background-image: radial-gradient(circle farthest-corner at 69.89% 22.31%, rgba(204, 119, 34, 0.834) 0%, rgba(204, 119, 34, 0) 56.12%), radial-gradient(circle farthest-corner at 77.81% 62.68%, rgba(222, 184, 135, 0.813) 0%, rgba(222, 184, 135, 0) 59.33%); background-image: radial-gradient(circle farthest-corner at 69.89% 22.31%, oklch(from #cc7722 l c h / 0.8344) 0%, rgb(from #cc7722 r g b / 0) 56.12%), radial-gradient(circle farthest-corner at 77.81% 62.68%, oklch(from #deb887 l c h / 0.813) 0%, rgb(from #deb887 r g b / 0) 59.33%);
Report
- white ink: worst 1.86:1 at 0% (fails AA); black ink: worst 6.23:1 at 100% (AA) → use black text.
- Banding high: ~14px bands at 1440px — add grain 30 (≈2% soft-light noise) or shorten the ramp.
Export
.gradient {
background-image: linear-gradient(135deg, #deb887 0%, #ddb381 7.14%, #dcaf7a 14.29%, #dbaa74 21.43%, #daa66e 28.57%, #d8a167 35.71%, #d79d61 42.86%, #d6985a 50%, #d59353 57.14%, #d38f4c 64.29%, #d28a45 71.43%, #d1853d 78.57%, #cf8135 85.71%, #ce7c2c 92.86%, #cc7722 100%);
background-image: linear-gradient(135deg in oklab, #deb887 0%, #cc7722 100%);
}bg-linear-to-br/oklab from-[#deb887] to-[#cc7722]
<svg xmlns="http://www.w3.org/2000/svg" width="1440" height="600" viewBox="0 0 1440 600"><defs><linearGradient id="bs-gradient" gradientUnits="userSpaceOnUse" x1="210" y1="-210" x2="1230" y2="810"><stop offset="0%" stop-color="#deb887"/><stop offset="7.14%" stop-color="#ddb381"/><stop offset="14.29%" stop-color="#dcaf7a"/><stop offset="21.43%" stop-color="#dbaa74"/><stop offset="28.57%" stop-color="#daa66e"/><stop offset="35.71%" stop-color="#d8a167"/><stop offset="42.86%" stop-color="#d79d61"/><stop offset="50%" stop-color="#d6985a"/><stop offset="57.14%" stop-color="#d59353"/><stop offset="64.29%" stop-color="#d38f4c"/><stop offset="71.43%" stop-color="#d28a45"/><stop offset="78.57%" stop-color="#d1853d"/><stop offset="85.71%" stop-color="#cf8135"/><stop offset="92.86%" stop-color="#ce7c2c"/><stop offset="100%" stop-color="#cc7722"/></linearGradient></defs><rect width="1440" height="600" fill="url(#bs-gradient)"/></svg>
{
"burlywood-to-ochre": {
"$type": "gradient",
"$value": [
{
"color": {
"colorSpace": "srgb",
"components": [
0.871,
0.722,
0.529
],
"hex": "#deb887"
},
"position": 0
},
{
"color": {
"colorSpace": "srgb",
"components": [
0.8,
0.467,
0.133
],
"hex": "#cc7722"
},
"position": 1
}
],
"$extensions": {
"com.brandsweets": {
"kind": "linear",
"css": "linear-gradient(135deg in oklab, #deb887 0%, #cc7722 100%)",
"interpolation": "oklab",
"angle": 135,
"name": "burlywood-to-ochre",
"contrast": {
"white": {
"ratio": 1.856,
"at": 0,
"passesAA": false,
"passesAALarge": false
},
"black": {
"ratio": 6.229,
"at": 1,
"passesAA": true,
"passesAALarge": true
},
"suggestedInk": "#000000"
}
}
},
"$description": "Burlywood to Ochre, interpolated in oklab."
}
}More from Burlywood
Point any MCP client at the shared gradients endpoint and your agent gets the same engine as this page — make_gradient returns CSS with the interpolation space, Tailwind v4, SVG, a PNG URL, a DTCG token and the contrast report in one call; brand_gradients derives the whole contact sheet from a brand or a palette. Read-only, no key. Every gradient is a /gradients/new/… link: open it, refine, paste it back.
https://mcp.brandsweets.com/gradients/mcpclaude mcp add --transport http brandsweets-gradients https://mcp.brandsweets.com/gradients/mcp
›make a burlywood to ochre hero gradient in oklch that passes AA for white text, with grain if it bands
Want the agent to remember your picks and write them into a living brand? Create a free BrandSweets workspace.
Machine-readable: gradients.md