Colour to colour
Teal to Copper gradient
Teal (#008080) into Copper (#b87333) — 134° apart on the OKLCH hue wheel. Below: the same two stops interpolated in OKLab and in OKLCH, side by side, because the difference is real and most generators never let you see it; then an eased version and a mesh, each with the worst-case contrast for white and black text. The engine's own pick for this pair is oklab — both colours are in the palette and the hue gap is small enough that the straight line stays clean.
OKLab and OKLCH, side by side
OKLab
Open in maker →A straight line through the a/b plane: the two hues meet halfway and desaturate a little at the midpoint. The safe default — it is what CSS and Tailwind default to.
linear-gradient(135deg in oklab, #008080 0%, #b87333 100%)
OKLCH (shorter hue)
Open in maker →Chroma and hue interpolate separately, so the midpoint keeps its saturation and the hue travels the short way round the wheel — richer, and it can pass through hues neither colour has.
linear-gradient(135deg in oklch shorter hue, #008080 0%, #b87333 100%)
And the sRGB line most tools draw, for comparison — the number is the chroma that survives at the dullest point.
Eased and mesh
Eased (soft)
Open in maker →A cubic-bezier(.4, 0, .6, 1) mix ratio baked into 15 stops: the transition lingers on each colour and moves faster through the middle, which is what makes a gradient read as designed rather than default.
linear-gradient(135deg in oklab, #008080 0%, #0f807f 8.28%, #24807d 16.03%, #388079 23.35%, #4a8074 30.32%, #5b7f6f 37.03%, #6b7e68 43.56%, #7b7d61 50%, #897c59 56.44%, #967a51 62.97%, #a17848 69.68%, #aa7641 76.65%, #b2753a 83.97%, #b67335 91.72%, #b87333 100%)
Mesh
Open in maker →Both colours as stacked radials over a base, laid out by a seeded Poisson-disc sampler — the same seed gives the same mesh forever. Exports as CSS, SVG and PNG.
background-color: #7b7d61; background-image: radial-gradient(circle farthest-corner at 35.62% 8.92%, rgba(184, 115, 51, 0.798) 0%, rgba(184, 115, 51, 0) 48.61%), radial-gradient(circle farthest-corner at 25.6% 64.67%, rgba(0, 128, 128, 0.867) 0%, rgba(0, 128, 128, 0) 58.4%); background-image: radial-gradient(circle farthest-corner at 35.62% 8.92%, oklch(from #b87333 l c h / 0.7976) 0%, rgb(from #b87333 r g b / 0) 48.61%), radial-gradient(circle farthest-corner at 25.6% 64.67%, oklch(from #008080 l c h / 0.8666) 0%, rgb(from #008080 r g b / 0) 58.4%);
Report
- white ink: worst 3.79:1 at 100% (AA-large only); black ink: worst 4.40:1 at 0% (AA-large only) → use black text.
- Body text fails AA everywhere on this gradient; large text (≥24px / 19px bold) is fine. Add a scrim or lower the chroma for body copy.
- Banding medium: ~8px bands at 1440px — add grain 15 (≈2% soft-light noise) or shorten the ramp.
Export
.gradient {
background-image: linear-gradient(135deg, #008080 0%, #2a807c 7.14%, #3e8078 14.29%, #4d8073 21.43%, #5a7f6f 28.57%, #667f6a 35.71%, #717e66 42.86%, #7b7d61 50%, #847c5b 57.14%, #8d7b56 64.29%, #967a50 71.43%, #9f794a 78.57%, #a87743 85.71%, #b0753c 92.86%, #b87333 100%);
background-image: linear-gradient(135deg in oklab, #008080 0%, #b87333 100%);
}bg-linear-to-br/oklab from-[#008080] to-[#b87333]
<svg xmlns="http://www.w3.org/2000/svg" width="1440" height="600" viewBox="0 0 1440 600"><defs><linearGradient id="bs-gradient" gradientUnits="userSpaceOnUse" x1="210" y1="-210" x2="1230" y2="810"><stop offset="0%" stop-color="#008080"/><stop offset="7.14%" stop-color="#2a807c"/><stop offset="14.29%" stop-color="#3e8078"/><stop offset="21.43%" stop-color="#4d8073"/><stop offset="28.57%" stop-color="#5a7f6f"/><stop offset="35.71%" stop-color="#667f6a"/><stop offset="42.86%" stop-color="#717e66"/><stop offset="50%" stop-color="#7b7d61"/><stop offset="57.14%" stop-color="#847c5b"/><stop offset="64.29%" stop-color="#8d7b56"/><stop offset="71.43%" stop-color="#967a50"/><stop offset="78.57%" stop-color="#9f794a"/><stop offset="85.71%" stop-color="#a87743"/><stop offset="92.86%" stop-color="#b0753c"/><stop offset="100%" stop-color="#b87333"/></linearGradient></defs><rect width="1440" height="600" fill="url(#bs-gradient)"/></svg>
{
"teal-to-copper": {
"$type": "gradient",
"$value": [
{
"color": {
"colorSpace": "srgb",
"components": [
0,
0.502,
0.502
],
"hex": "#008080"
},
"position": 0
},
{
"color": {
"colorSpace": "srgb",
"components": [
0.722,
0.451,
0.2
],
"hex": "#b87333"
},
"position": 1
}
],
"$extensions": {
"com.brandsweets": {
"kind": "linear",
"css": "linear-gradient(135deg in oklab, #008080 0%, #b87333 100%)",
"interpolation": "oklab",
"angle": 135,
"name": "teal-to-copper",
"contrast": {
"white": {
"ratio": 3.792,
"at": 1,
"passesAA": false,
"passesAALarge": true
},
"black": {
"ratio": 4.399,
"at": 0,
"passesAA": false,
"passesAALarge": true
},
"suggestedInk": "#000000"
}
}
},
"$description": "Teal to Copper, interpolated in oklab."
}
}More from Teal
Point any MCP client at the shared gradients endpoint and your agent gets the same engine as this page — make_gradient returns CSS with the interpolation space, Tailwind v4, SVG, a PNG URL, a DTCG token and the contrast report in one call; brand_gradients derives the whole contact sheet from a brand or a palette. Read-only, no key. Every gradient is a /gradients/new/… link: open it, refine, paste it back.
https://mcp.brandsweets.com/gradients/mcpclaude mcp add --transport http brandsweets-gradients https://mcp.brandsweets.com/gradients/mcp
›make a teal to copper hero gradient in oklch that passes AA for white text, with grain if it bands
Want the agent to remember your picks and write them into a living brand? Create a free BrandSweets workspace.
Machine-readable: gradients.md